LinkHub-E

LinkHub-E
LinkHub-E

Ethernet 1-wire Bus Master


  • Based on ibutonlink.com's LINK protocol.
  • Uses a telnet interface to the LINK
  • Internally
    • Serial LINK
    • 4 electrically separate (logically combined) arms
    • Lantronix Xport provides the network interface with web and telnet configuration
    • Default: Web configuration port 9999, Link at port 10001, DHCP client for network address
  • Supported by OWFS


Configuration

  • No auto-discovery. 
    • The IP address must be set via the telnet interface
    • Or in the DHCP server
    • Or using the default assignment
  • There is a telnet port for device configuration.
Andy offers the following setup advice:

Here is my working configuration as configured via the command line menus.
  • web configuration port is 80 ,
  • telnet configuration port is 9999
No security setup and mostly default except for serial configuration.

Change Setup:
 0 Server
1 Channel 1  
3 E-mail  
5 Expert  
6 Security  
7 Defaults  
8 Exit without save  
9 Save and exit            Your choice ? 0

IP Address : (000) .(000) .(000) .(000)
Set Gateway IP Address (N) ?
Netmask: Number of Bits for Host Part (0=default) (0)
Set DNS Server IP addr  (N) ?
Change Telnet/Web Manager password (N) ?
Change DHCP device name (not set) ? (N) ?
Change Setup:
 0 Server
 1 Channel 1
 3 E-mail
 5 Expert
 6 Security
 7 Defaults
 8 Exit without save
 9 Save and exit            Your choice ? 1

Baudrate (115200) ?
I/F Mode (4C) ?
Flow (00) ?
Port No (10001) ?
ConnectMode (C0) ?
Send '+++' in Modem Mode  (Y) ?
Show IP addr after 'RING'  (Y) ?
Auto increment source port  (N) ?
Remote IP Address : (000) .(000) .(000) .(000)
Remote Port  (0) ?
DisConnMode (00) ?
FlushMode   (00) ?
DisConnTime (00:00) ?:
SendChar 1  (00) ?
SendChar 2  (00) ?

 Change Setup:
 0 Server
 1 Channel 1
 3 E-mail
 5 Expert
 6 Security
 7 Defaults
 8 Exit without save
 9 Save and exit            Your choice ? 5

TCP Keepalive time in s (1s - 65s; 0s=disable):  (45) ?
ARP Cache timeout in s (1s - 600s) :  (600) ?
CPU performance (0=Regular, 1=Low, 2=High):  (0) ?
Disable Monitor Mode @ bootup (N) ?
RS485 tx enable active level (0=low; 1=high):  (0) ?
HTTP Port Number :  (80) ?
SMTP Port Number :  (25) ?
MTU Size (512 - 1400):  (1400) ?
Enable alternate MAC (N) ?
Ethernet connection type:  (0) ?

 Change Setup:
 0 Server
 1 Channel 1
 3 E-mail
 5 Expert
 6 Security
 7 Defaults
 8 Exit without save
 9 Save and exit            Your choice ? 6

Disable SNMP (N) ?
SNMP Community Name (public):
Disable Telnet Setup (N) ?
Disable TFTP Firmware Update (N) ?
Disable Port 77FEh (N) ?
Disable Web Server (N) ?
Disable Web Setup (N) ?
Disable ECHO ports (Y) ?
Enable Enhanced Password (N) ?
Disable Port 77F0h (N) ?

Previous page: HA7E and HA7S
Next page: TAI603B