DESCRIPTIONowphp is a php extension that provides an interface to OWFS.
owphp is created by swig (http://www.swig.org) which can be easily modified to support other programming languages.
init( interface )interface
Location of the 1-wire bus:
"u" Direct connection to the 1-wire interface on the USB port DS9490
Direct connection to a 1-wire interface on the serial port DS9097U or DS9097
Sets the serial port. It should have a LINK, DS9097U or DS9097 (passive adapter) attached. The "-d" is implied if two arguments are supplied. The -d and -u options are mutually exclusive.
Use the USB adapter (DS9490) as 1-wire bus master. An optional number
1,2,... specifies which adapter to use if more than one is present.
-t --timeout seconds
Set the number of seconds that volitile data (measured values like temperature and voltage) should be cached before requerying the BUS. More stable values will be saved ten times longer (switch settings, memory contents). 10 seconds is the default.
-C --Celsius | -F --Fahrenheit | -K --Kelvin | -R --Rankine
Temperature scale used for data output. Celsius is the default.
-f --format f[.]i[[.]c]
Display format for the 1-wire devices. Each device has a 8byte address, consisting of 1byte f amily code, 6 byte I D number, and 1 byte C RC checksum.
Possible formats are f.i (default, 01.A1B2C3D4E5F6), fi fic f.ic f.i.c and fi.c
All formats are accepted as input, but the output will be in the specified format.
--background | --foreground
Whether the program releases the console and runs in the background after evaluating command line options. background is the default.
Version of this program and related libraries.